-
The wall framing takeoff now reads walls drawn as two lines
The wall-framing-takeoff DXF import pairs the two face lines of an architect wall into one centre line, so drawings need no redrawing as centre lines first.
-
Drywall and insulation labor now count in the framing takeoff budget
The wall framing takeoff budget adds drywall and insulation labor lines from per-sheet and per-bag rates you type; no rates are shipped.
-
Drywall joints on studs, now a dropdown in the wall framing takeoff
The wall framing takeoff page can now snap drywall end joints to studs, so the sheet count reflects boards cut to land on framing.
-
Wall framing takeoff reads a DXF floor plan
Drop a DXF floor plan onto the wall framing takeoff and it builds the walls, corners, tees and openings for you instead of making you type them.
-
Wall framing takeoff counts foundation corner bars
The foundation rebar count can now run straight bars along each side with an L-bar at every corner, instead of one bent loop.
-
Gable wall panel cut lists now measure plates along the slope
A bug fix in wall-framing-takeoff: shop panels on a gable end listed sloped plates by their flat run, so every cut was short.
-
Wall framing takeoff: hold-down counts now have page controls
The nail section of the page gained hold-down fields, so the typed-rule hold-down count and its budget line no longer need the command line.
-
Wall framing takeoff now counts hold-downs
A typed rule (wall ends, openings over a width) becomes a hold-down count and a budget line in the framing takeoff.
-
Insulation bags now land in the wall framing takeoff budget
The wall framing takeoff budget prices wall, rim joist and attic insulation bags from your own prices, and lists any bag with no price instead of guessing.
-
wall-framing-takeoff now counts nails, not just lumber
A new --fasteners option in wall-framing-takeoff counts nails by connection from the framing it placed, with every nailing rule an input you can change.
-
Wall framing takeoff counts nails on the page
The browser page can now count framing and sheathing nails by connection, with a box count and a budget line.
-
Wall framing takeoff now prints one sheet per shop panel
Shop drawings can add a page for each transportable wall panel: cropped elevation, weight and its own cut list, from the CLI or the page.
-
Wall framing takeoff prints one sheet per shop panel
The PDF shop drawings now end with a sheet for every prefab wall panel, each with its own parts and lumber weight.
-
Wall framing takeoff now writes its shop drawings as a PDF
The framing shop drawings used to need a browser's print-to-PDF. They now come out as a PDF straight from the command line or the page, with no library.
-
Wall framing takeoff now counts rafter ties
The nail counts gain a hurricane-tie count: one per rafter bearing, two per truss, with a price, from the CLI or the page.
-
Wall framing takeoff now reads IFC floor plans
After DXF, wall-framing-takeoff reads IFC building-model files: wall axes, nested placements, doors and windows. Tested on hand-written fragments only.
-
From a generated house plan to a stud count, with no typing
The wall framing takeoff now reads the DXF that Open House Plans writes, and every door and window it finds matches the plan's own schedule.
-
Wall framing takeoff frames windows that sit close together
Two windows a few inches apart used to stop the wall framing takeoff cold. They now share king studs, and closer ones get a plain-words answer.
-
Wall framing takeoff now orders baseboard and casing
A new --trim count packs baseboard and door and window casing pieces into stock boards and feeds the budget.
-
Interior trim now has a card on the wall framing page
The baseboard and casing count is on the wall-framing-takeoff page: type stock lengths and prices, see boards and a budget line, save it in the plan file.
-
Where drywall sheets end: 18 joints off the studs in a sample house
Hung naively, a sample house's 8 ft drywall sheets end between studs 18 times. Snapping each cut to a stud costs 4 sheets and fixes all 18.
-
Ceiling joist spacing now a dropdown in the wall framing takeoff
The wall framing takeoff page can now cut ceiling drywall sheet ends back to a joist, with 12, 16, 19.2 or 24 inch spacing.
-
Ceiling drywall joints now land on joists in the wall framing takeoff
The drywall estimate can snap ceiling sheet ends to joists, not only wall sheet ends to studs.
-
Wall framing takeoff: ceiling drywall can now follow the roof's joists from the page
A new option in the ceiling joist select makes drywall ceiling joints land on the joists the roof model already placed.
-
Drywall ceilings now follow the roof's own ceiling joists
The wall framing takeoff reads ceiling joist positions from its roof layout, so drywall end joints land on the joists the plan actually has.
-
Wall framing takeoff handles doors and windows next to a corner
A door 3 inches from a wall end used to be refused. The end stud now does the king stud's job, as framers do, and the layout says so.
-
Insulation bags now on the wall framing takeoff page
The wall framing takeoff page can count wall-cavity, rim joist and attic insulation from the framing it places, using bag figures you type from the label.
-
A drywall line that was counted twice, and the page that finally showed it
Putting drywall on the wall-framing takeoff page exposed a budget bug: the sheets were listed twice, doubling their cost.