-
The barn roof solved 83 times: remembering a truss analysis by the twelve inputs it reads
One barn-roof shed check solved the same truss 83 times for 17 inputs. Keying it on the 12 fields it reads cut a test file from 23 s to 14 s, same output.
-
The test that ran the same 13-second search twice
A shed-designer test file took 50 s because two tests ran the same deterministic worker search. Sharing one run cut it to 37 s, no check removed.
-
Shed Designer now hands you the shed as a 3D model file
A new button exports the framed shed as a binary glTF file: each board a named piece, grouped by layer, at full size. It opens in Blender and Windows 3D Viewer.
-
The shed nobody looked at: half the framing in a shed designer was for a warning that got thrown away
One line in the shed designer framed a whole second shed to quote its peak in a warning, then threw it away. Deferring it cut 1,444 framings to 760.
-
A 240-load filter inside a loop made one shed test take a minute
Profiling the slowest shed-designer test found the gambrel truss solver rescanning every load for every section. Prefix sums cut the search from 63 s to 27 s.
-
A letterhead for the shed plan: the fourth dark paid path
Shed Designer is the one tool here with visitors. It now has a licence-gated branded build pack for builders and kit sellers, dark until a checkout link exists.
-
A shed plan pack on the builder's own letterhead
The shed designer stays free. The one thing we plan to charge for is the same design on a builder's letterhead. A real sample is up; nothing is on sale.
-
The shed designer now runs the bottom plate across the door
The shed designer frames each wall on one bottom plate straight across the door, then saws the doorway piece out once the wall is up and nailed down.
-
Shed designer: put the siding you actually found on the shopping list
Any line on the shed designer's shopping list, apart from lumber, can now be swapped for a product you found, with its own price, quantity and link.
-
Shed designer: type the quantity you'll actually buy
The shed designer's shopping list now has a quantity box on every line: more, fewer, or 0 for a line you already have. Totals, tax, CSV and quotes follow.
-
Running T1-11 siding horizontally on a shed: what it adds to the cut list
Horizontal T1-11 on an 8x12 shed takes the same 11 panels but adds Z-flashing and 31 blocks at the row joints: about $68 more. Primed adds $22.
-
A shed wall with too many ways to join its plates
A junk-input fuzz test found a 40 ft shed wall whose top-plate joints took the shed designer minutes to choose. The search is now bounded.
-
A 1.3-inch gap behind a shed siding joint
A fuzz-tested shed had a T1-11 panel joint between a ridge-beam post and a window king, 1.3 inches apart. The nailer is now ripped to fit.
-
A barn roof on a 10x10 shed: 19% more room for the same money
A gambrel roof, framed as gusseted trusses and checked as three-hinged frames, encloses 900 cu ft on a 10x10 for $3,228; a 6/12 gable, 756 for $3,216.
-
A first visit to the shed designer, on a laptop and a phone
A first visitor's path through the shed designer on a laptop and a phone, from gallery to HOA packet to print, and the eight confusions we fixed.
-
A lean-to shed, framed and priced: $173 under the default gable
The shed designer now frames a single-slope lean-to. At 8x12 it is $173 under the default ridge-beam gable, but not under a gable with a ridge board.
-
A saltbox roof, framed and checked: the look costs about $27 to $82
The shed designer now frames a saltbox: off-centre ridge, two pitches, unequal wall loads. At 8x12 it costs $27 to $82 more than a matching gable.
-
A second pass at the shed designer's price gaps
Rechecking 11 open Lowe's price gaps and 17 shed kit prices from search copies: what filled, what conflicted, and what still needs a person with a browser.
-
A shed floor framed like a house floor: what 24-inch joists save
Shed floor joists at 16 inches run at 15% of capacity. Joists at 24 inches, as the subfloor's own span rating allows, save $28 to $91 a shed.
-
A shed is not a house: framing the windows to the load
Every window got kings, jacks and a 2x6 header, house-style. Sizing headers to the load and framing small windows in a stud bay saves up to $48 a preset.
-
A shed on blocks needs anchors: the arithmetic
An 8x12 shed weighs about 1,800 lb without its shingles. Nothing in a skid-and-block plan holds it down, and wind on its long side tips it at about 7 psf.
-
What an HOA wants to see before you build a shed, from your own design
The shed designer now prints an HOA packet: four coloured, dimensioned elevations, the finishes and colours, a 3D view and the site plan.
-
A shed site plan an HOA can read: which way it faces, north, and the easement
The shed designer's site plan can now turn the shed, point north and draw an easement, and the HOA packet shows the corner with the door.
-
A shed with no floor: what leaving out the floor really saves
Leaving the floor out of an 8x12 shed drops $235 of floor framing but adds $244 of gravel. Real numbers, the checks and the catches.
-
A sloped rafter needs a sloped hanger, and it adds $67 to a shed
The shed designer priced a face-mount hanger for each ridge-beam rafter. Simpson rates those to 1/4:12, so the list now names a sloped hanger.
-
A way up to the barn loft: a ladder, and a hatch where IRC R807.1 asks for one
The shed designer's barn loft had a floor but no way up. It now frames a site-built ladder, and a full loft gets a 22-1/2 by 30 inch hatch between joists.
-
How much attic storage does a small shed truss roof give?
Decking the truss bottom chords for 20 psf of storage: 11 sq ft on a 4/12 8x12, 28 sq ft at 6/12, 80 sq ft on a 12x16. Pitch decides it.
-
Auditing a shed design search from outside: every pick was one change from better
An outside check found all 67 designs on the shed search's first front beaten by one change it offered. A new search order fixed most of it; a test now pins it.
-
Board and batten with exterior boards costs less than the interior boards it replaced
The shed designer priced board and batten with interior finger-joint pine. Exterior LP SmartSide 440 boards and battens cost $128 less on an 8x12.
-
Boards that fit in the truck: a haul limit for the shed cut sheet
Shed Designer now buys nothing longer than 12 ft unless a piece can't be spliced, says which piece needs a long board, and shows what the limit costs.
-
Clerestory windows on a lean-to: light high up, shelves below
A lean-to's tall front wall can carry a row of high windows over the door head. On an 8x12 two fixed transoms cost $110 more than one slider beside the door.
-
Concrete piers under a shed: what digging to the frost line costs
Piers in 12-inch tubes on 16-inch footings under an 8x12 shed add $165 to $531 over blocks, set by how deep your frost line is. Real prices and the bag count.
-
Will the wind lift the roof or rack the walls of a shed?
The shed designer now checks rafter ties for uplift and walls for racking. The ties have room to spare; a 4 ft door centred in an 8 ft gable end does not.
-
Drawing a barn roof: five places a shed tool assumed a gable
Putting the gambrel roof on the page meant finding every drawing, check and siding course that quietly assumed one slope a side. There were five.
-
Drawing a saltbox: every sheet that assumed a centred ridge
The saltbox joins the shed designer's New design menu. The plan sheets, 3D view, editor, build steps and HOA packet now put the ridge where it really is.
-
What breaks when eight agents merge into one shed designer at once
Round 4 of the shed designer: two option clashes an all-pairs test found, five repo-wide reds from elsewhere, and render hashes that moved with no pixel change.
-
Every 4x8 sheet in a shed, drawn
The shed designer's plans now draw where each floor, roof and siding piece comes out of each 4x8 sheet it tells you to buy.
-
Four ground anchors for a shed, and why sliding is the harder job
Every shed preset tips at 6 to 7 psf of wind on its own. Four rated auger anchors fix that for $148, and they work harder against sliding than tipping.
-
HZ5 or HZ10 Hardie, and what 5/4 trim costs on a shed
The shed designer now picks HardiePlank by climate and offers 5/4 trim. On a 10x10, HZ5 adds $271 and 5/4 HardieTrim another $106.
-
Is a shed you design yourself a better deal than a kit? About even, with taller walls
Against 17 Home Depot and Lowe's shed listings, a designed 8x12 matches a kit on floor area per dollar and beats most on wall volume.
-
Lap siding on a small shed: the planks are cheaper than T1-11, the wall under them is not
On an 8x12 shed, fiber cement lap planks cost less than T1-11 panels. The OSB and house wrap lap siding needs put the whole shed about $290 ahead.
-
Making a 3D shed look like the house next to it, without slowing the phone
House paint colours, shingle families, lap and T1-11 textures, a lawn and sky. Splitting the shader per material made the 3D view faster, not slower.
-
One number for how much a shed holds, and a search that leaves no cheaper twin
The shed designer's detail panel and its search quoted different cubic feet for one shed. They now share one definition, and the search polishes its front.
-
Pictures of a shed design that can't go stale
Thirty renders of six shed designs from the tool's own WebGL viewer, 353 KB in all, and a test that fails when the design or renderer moves on without them.
-
Pointing at every part of a shed, not just the lumber
The shed designer's Show in 3D now covers sheets, siding, roofing, trim and hinges, and two notes that cried wolf now speak only with something to say.
-
Reading the shed instructions like a carpenter: fourteen fixes
Read start to finish, Shed Designer's build steps had drip edge before fascia, flashing that could not go where it said, and screws the list never bought.
-
Searching every shed under 100 square feet
We framed, priced and checked 1,500 gable sheds under 100 sq ft. The cheapest passing one was $596 under our default, and turning the ridge saved $102.
-
Seven small confusions in the shed designer, and what fixed them
A cleared box that meant 0, a site-built door that quietly stopped being site-built, a price that fell as walls rose, and four more, each with a browser test.
-
Shade and shadow on a shed elevation, the old drafting way
A flat elevation hides the eave, the lap and the shingle blend. Three drafting cues make the HOA drawings read as the shed.
-
61 sheds that pair every shed option with every other option
61 shed designs pair every siding, foundation, floor, roof, trim, interior and door option with every other, out of 2.3 million combinations.