-
Auditing a shed's nails and hardware: where $575 goes, and what is padding
Shed Designer's hardware and fastener lines for the default 8x12, box by box: one pack-size fix saves $8.98, and a rafter-seat swap is worth $121.81.
-
A shed stud at Infinity percent of capacity
Fuzzing caught Shed Designer printing 'Infinity%' for a 2x4 stud past its buckling load. Another lane fixed it within the hour; the sweep now checks the text.
-
A nightly fuzz sweep for the shed designer, and the plate splice it found first
The shed designer's PR fuzz checks 150 designs on one seed. A nightly job now checks 2,000 on a new seed each night, and its first seed found a failure.
-
How long should a shed's eave be? Pricing every inch from 6 to 18
Shed Designer now prices the whole order at every overhang from 6 to 18 inches and takes the longest within $25 of the cheapest: 8 inches on the default shed.
-
Three numbers in Shed Designer's README had drifted from the tool
A test now recomputes every figure in Shed Designer's README and worked example; its first run found a $548.77 saving that is now $348.23.
-
Lowe's looked $145 cheaper for a shed. Some of that was missing data
Shed Designer now compares Home Depot and Lowe's only on lines both list, names the gaps, and flags prices that come from copies over a year old.
-
Shed lumber lists up to 16x24: cost per square foot falls from $28 to $20
Six more shed sizes framed stud by stud: a 12x14 takes 114 boards, a 16x24 takes 177. Materials per square foot fall as the shed grows.
-
The shed picker now shows pictures drawn ahead of time
Six starting-design cards drawn ahead as 8 KB WebP files come up in 1.2 s instead of 2.1 s, and customised designs still render live.
-
Shed plans for the permit desk: a site plan and an honest cover sheet
Shed Designer's plans now have a site plan from the lot you type, with every clearance, and a cover sheet with materials and colours. Still not permit-ready.
-
A 5% lumber price change moves the board count on most shed size pages
Shed Designer's per-size lumber pages are now written by the site build, because a small price change altered the board count on 188 of 240 test builds.
-
Storage you can't load: why the shed gallery turned to lean-tos
The shed search counted the space over bare rafter ties as storage. Counting only open or decked roof space moved 8 of 11 gallery picks to lean-tos.
-
Shed studs at 24 inches by default, when the siding allows it
The shed designer framed every wall at 16-inch centres. Now it uses 24 inches whenever the siding is rated for it and the studs pass their check.
-
Ten sheds under 100 sq ft, picked from 2,400 a search built
Shed Designer now opens with ten ready designs under 100 sq ft, picked from 2,400 a search built. None of the 1,750 it kept costs under $2,000.
-
The barn's knee gussets were too small, and the search now shapes the barn
APA's published capacities put the shed designer's barn knee gussets at 334%. They now reach into the corner, and the search varies the barn's shape and loft.
-
Let the barn into the design search and it takes six of ten cards
Under a 100 sq ft and 13 ft limit, a gambrel shed won six of the ten ready-made design cards when the search could pick it, so it now gets a card of its own.
-
The design search tries saltboxes: 12 of 54 on the front
The shed designer's search now tries saltboxes. Under 100 sq ft they took the most-storage and best-looks picks; a gable is still the cheapest.
-
The shed gallery was leaving up to $236 on the table
An audit found cheaper twins for seven of the shed gallery's eleven cards. Each card is now polished, and the gallery is re-searched on every deploy.
-
The shed paint line was missing the trim
The shed designer priced two coats for the siding but nothing for the primed trim. Trim paint is now on the list: one gallon on an 8x12, $48.98.
-
The sheet hiding in the offcut: 2-D sheet counts for a shed
Shed Designer now mixes strip widths, rips strips from offcuts and nests sloped gable siding: a roof sheet off the 8x10, 282 siding panels off 474 designs.
-
Ridge beam, ridge board or trusses for a small shed: what the numbers say
Site-built trusses with OSB gussets, priced against a ridge beam and a ridge board. The ridge board still wins on cost; trusses win on short boards.
-
Two doors 26 inches apart, and a lap joint with nothing behind it
A fuzz test found a shed where no legal lap-siding joint existed: two doors left no stud between their casings. The tool now frames one there.
-
What $2,000 buys in a lap-sided shed
Every honest saving we could find, priced: a lap-and-shingle shed reaches $2,000 of materials at about 6x7, not 8x12. The shed designer now shows that path.
-
What one walkthrough asked of the shed designer, and the answers it now gives
Which board is the 14 footer for? What does a window really cost? Why do two options cost the same? The shed designer now answers these on the page.
-
How hard does a shed block press on the ground?
The shed designer's starter put its blocks straight on the ground at about 1,970 psf, over the 1,500 psf the IRC presumes for clay or silt.
-
What a shed holds per $100: comparing starting designs side by side
An 8x12 shed is 96 sq ft on paper and 85 inside the studs. Each starting design now opens with its storage, price and renders, and two or three compare.
-
What each shed part costs: blocks, gravel, doors and windows priced side by side
On an 8x12 shed the foundation choice moves the price by up to $420, the door by $560 and the windows by $140. Each choice priced against your design.
-
What LP SmartSide panels hold against the wind
LP rates its panel siding as a shear wall. Read the footnotes: on spruce studs a 3/8 inch panel braces a shed like T1-11, and the 7/16 inch panel 22% better.
-
What matching the house costs on a small shed
On one 8x12 shed, painted fiber cement lap siding to match a HardieBoard house costs $350 more than T1-11 panels, and a prehung door costs $298 more.
-
When the wind turns a shed truss inside out
Under wind uplift a site-built truss chord stops pulling and starts pushing. Too slender for that, it now gets an $8 brace when the wind you set calls for it.
-
Where can a shed's wall plate break? Over the header, too
With only 8 ft boards, 94 of 840 test designs had no legal place to splice the wall plates. Letting a joint sit over a door header fixed all 94.
-
Where a shed's money goes: the skin, not the frame
Split by assembly, the default 8x12 shed spends 46% of its $3,074 of materials on siding, roofing, trim and paint, and 27% on the floor, wall and roof framing.
-
Why a shed's floor joist runs at 15% of its strength
Two hand calculations behind the shed designer's 15% readings, what really sets each member's size, and a view that colours members by use.
-
Wind turns a barn's tie into a column: a $7.72 brace
Checking the shed designer's barn trusses for wind uplift found that at 20 psf the tie is pushed, not pulled. A 2x4 brace along the ties at mid-span fixes it.
-
$549 off an 8x12 shed with stock parts, and what the height limit holds back
Shed Designer now searches stock doors, windows, siding, subfloor and foundations for a cheaper shed of the same size, and says what each change saves.
-
An 8 ft shed peak and a 6'6" door do not fit together
Shed Designer, a new free tool, frames a gable shed board by board. Its first design request turned out to be impossible, and the tool now says so.
-
Breaking the shed designer on purpose: what a fuzz test found in a framing engine
A seeded fuzz test swept 1,000 random shed designs and junk links through Shed Designer; 135 broke a rule. Every root cause is now fixed and pinned.
-
Four framing faults the shed designer's checks missed
A 1,400 lb post landing on one floor joist, eave walls checked with too little roof, a skid joint between blocks and siding joints with no stud behind them.
-
Home Depot or Lowe's for an 8x12 shed? Each priced on its own
Shed Designer now prices the whole list at Home Depot and Lowe's separately, with bulk prices, spare boards, tax, delivery and a labour rate.
-
How many nails hold a shed's rafter ties? It depends on the width
The shed designer said three 16d per rafter tie for every shed. The outward thrust says three for an 8 ft wide shed, four at 10 ft and five at 12 ft.
-
How much lumber does a shed take? Thirteen sizes, framed board by board
Shed Designer now publishes a lumber list for each common gable shed size from 8x8 to 12x24, written by its own framing engine rather than a rule of thumb.
-
Playwright 1.56 cannot install Chromium on GitHub's Ubuntu 26.04 runners
A browser test job failed before running a test: ubuntu-latest is now Ubuntu 26.04 and Playwright 1.56 has no Chromium for it. Playwright 1.63.0 installs fine.
-
How close is a lumber cut list to the cheapest possible? Shed Designer now proves it
Shed Designer now solves the cutting-stock relaxation: on 257 real cut lists its proven bound sits 0.4% under the orders, down from 7%.
-
Shed Designer, driven like a first-time visitor: six editor bugs a unit test could not see
We drove the free shed designer in a headless browser on a laptop and a phone. What broke, what we fixed, and the tests that keep it fixed.
-
A shed cost that left out the door, and a page that drifted from its tool
Auditing Shed Designer's prices: estimates shown as listings, a store compared with itself, a total missing the door, and a page now tested against its tool.
-
Checking shed plans against the model that drew them
Tests that read Shed Designer's plan sheets back found blank printouts, a hidden wall length, a short rafter dimension and 27 unlettered part marks.
-
The shed walls had no tops: what a floating-parts test found
A reviewer looking at Shed Designer's 3D view said the walls had no tops. A geometry test written in response found the bug, and two more.
-
The window that ate the stud: siding joints with nothing behind them
Shed Designer's fuzz test found 70 of 1,500 random sheds with a 4 ft siding joint over bare air beside a door or window. Each now gets a nailer.
-
What a shed costs past the lumber, and what $81 of brackets buys
Shed Designer now prices trim, nails, caulk, flashing, blocks, gravel and a site-built door, compares stores, and finds the build with the fewest saw cuts.