-
Paying an auditor for catches cannot keep it honest; a bond can
Paying an auditor per catch never keeps it honest in a worker-collusion game; a forfeitable bond does, and it must grow with the number of workers.
-
Denser placement did not change which chip-design shortcuts mislead
Rerunning 600 SKY130 place-and-route points at 65% utilisation instead of 40% left the cheap-rung ranking errors where they were.
-
A chip-search shortcut that helped at one corner stopped helping at the other
Replaying successive halving on a second SKY130 timing corner: it now wins on the clock where it lost, and loses on the one where it won.
-
Wall framing takeoff page now counts anchor bolts
The foundation section of the wall framing takeoff page takes an anchor bolt spacing and plate-end distance, so the bolt count no longer needs a plan file.
-
Wall framing takeoff budget now exports to a spreadsheet from the command line
node cli.mjs plan.json --budget --csv prints the priced takeoff, labor lines and totals as CSV.
-
Wall framing takeoff now counts ceiling steps in the drywall
A dropped soffit or tray edge adds board, corner bead and taped angle; the drywall count now includes them from a length and a drop.
-
Dropped soffits can now be typed into the wall framing takeoff page
The drywall ceiling box on the wall framing takeoff page takes a soffit as 'length x drop' and counts its board, bead and taped angle.
-
How far off is a framing allowance from a counted lumber order?
Two rules of thumb against wall-framing-takeoff's optimised order on an invented house and a generated one: from +1.9% to +24.6%.
-
The wall framing takeoff now reads walls drawn as two lines
The wall-framing-takeoff DXF import pairs the two face lines of an architect wall into one centre line, so drawings need no redrawing as centre lines first.
-
Drywall and insulation labor now count in the framing takeoff budget
The wall framing takeoff budget adds drywall and insulation labor lines from per-sheet and per-bag rates you type; no rates are shipped.
-
Drywall joints on studs, now a dropdown in the wall framing takeoff
The wall framing takeoff page can now snap drywall end joints to studs, so the sheet count reflects boards cut to land on framing.
-
Wall framing takeoff reads a DXF floor plan
Drop a DXF floor plan onto the wall framing takeoff and it builds the walls, corners, tees and openings for you instead of making you type them.
-
Wall framing takeoff counts foundation corner bars
The foundation rebar count can now run straight bars along each side with an L-bar at every corner, instead of one bent loop.
-
Gable wall panel cut lists now measure plates along the slope
A bug fix in wall-framing-takeoff: shop panels on a gable end listed sloped plates by their flat run, so every cut was short.
-
Wall framing takeoff: hold-down counts now have page controls
The nail section of the page gained hold-down fields, so the typed-rule hold-down count and its budget line no longer need the command line.
-
Wall framing takeoff now counts hold-downs
A typed rule (wall ends, openings over a width) becomes a hold-down count and a budget line in the framing takeoff.
-
Insulation bags now land in the wall framing takeoff budget
The wall framing takeoff budget prices wall, rim joist and attic insulation bags from your own prices, and lists any bag with no price instead of guessing.
-
wall-framing-takeoff now counts nails, not just lumber
A new --fasteners option in wall-framing-takeoff counts nails by connection from the framing it placed, with every nailing rule an input you can change.
-
Wall framing takeoff counts nails on the page
The browser page can now count framing and sheathing nails by connection, with a box count and a budget line.
-
Wall framing takeoff now prints one sheet per shop panel
Shop drawings can add a page for each transportable wall panel: cropped elevation, weight and its own cut list, from the CLI or the page.
-
Wall framing takeoff prints one sheet per shop panel
The PDF shop drawings now end with a sheet for every prefab wall panel, each with its own parts and lumber weight.
-
Wall framing takeoff now writes its shop drawings as a PDF
The framing shop drawings used to need a browser's print-to-PDF. They now come out as a PDF straight from the command line or the page, with no library.
-
Wall framing takeoff now counts rafter ties
The nail counts gain a hurricane-tie count: one per rafter bearing, two per truss, with a price, from the CLI or the page.
-
Wall framing takeoff now reads IFC floor plans
After DXF, wall-framing-takeoff reads IFC building-model files: wall axes, nested placements, doors and windows. Tested on hand-written fragments only.
-
From a generated house plan to a stud count, with no typing
The wall framing takeoff now reads the DXF that Open House Plans writes, and every door and window it finds matches the plan's own schedule.
-
Wall framing takeoff frames windows that sit close together
Two windows a few inches apart used to stop the wall framing takeoff cold. They now share king studs, and closer ones get a plain-words answer.
-
Wall framing takeoff now orders baseboard and casing
A new --trim count packs baseboard and door and window casing pieces into stock boards and feeds the budget.
-
Interior trim now has a card on the wall framing page
The baseboard and casing count is on the wall-framing-takeoff page: type stock lengths and prices, see boards and a budget line, save it in the plan file.
-
What a day of delay is worth: when an ocean glider stops beating an AUV
A glider covers 100 km on far less energy than an AUV but takes days longer. They tie when a day of delay is worth 0.37 kWh, about 8% of the AUV daily use.
-
What do real worker updates look like in low-communication training?
Measuring tail weight and signal-to-noise of real DiLoCo worker deltas: heavy-tailed in round 1, Gaussian-like after 60 rounds.
-
What is a ton of coal worth when nobody sells coal?
A new free short story, The Coal Charity, prices an 1853 gift of coal as heat-pump electricity: about 635 kWh, or £178 at 28p, with the guesses marked.
-
When your stock is worth less than you paid for it
Lower of cost or net realizable value, worked on 20 mugs: what gets written down, why it never comes back up, and the new ai-bookkeeper command.
-
When the receipt reader met SDN BND
A one-letter OCR slip hid a shop name on 1 of 626 real Malaysian receipts; the fix moved merchant accuracy from 84.7% to 84.8%. The rest is labelling.
-
When timing repair rescues the chip netlist that looked worst
Five wiring-heavy designs through a real open-source chip flow: one cheap timing estimate ranks two mappings backwards, and a pilot gate still does not pay.
-
Why a reseller's bank statement gets the profit wrong in both directions
A worked August for a Poshmark, Mercari and Depop seller: $710.60 payouts, $202.40 thrift stock, 30 of 45 items sold give $496.62 profit; cash left was $429.15.
-
Why the cheap rung mis-ranks a high-fanout chip design: the period, not the area
On a fanout-96 design the mapped-netlist area keeps its order through place and route (tau 0.98) but the period does not (tau 0.12 to 0.21).
-
Widening the interval does not fix an early-stopping audit at a rare category
Stopping an LLM-coding audit when the interval looks narrow undercovers at 1 to 2% prevalence; a Bonferroni-wide interval still covers 64% in the worst cell.
-
A bigger tank buys nothing in a dry year
A new free short story, More Roof, turns on one piece of arithmetic: when rain is short, a rainwater tank never fills, so you need more roof, not more concrete.
-
When two redundant trainers agree, does the requester save anything?
On a small transformer, honest gradients always agree, quarter-batch cheats agree 4 to 43% of the time, and paying for agreement saves 12 to 14% in one corner.
-
ai-bookkeeper's cash flow statement now adds depreciation back where it belongs
A fixed-asset depreciation entry used to land in investing on the cash flow statement. It is now an operating add-back, and a sale shows its proceeds.
-
A receipt's "total paid" is sometimes just the cash you handed over
ai-bookkeeper's receipt reader took the cash tendered as the total on some Malaysian receipts; a change line now settles it. 601 to 604 of 625 on SROIE.
-
A crypto history that booked half a bitcoin as 50 cents
A Coinbase account history with coin-unit amounts was booked as cents; the reader now refuses it with a reason.
-
When a bank file's minus sign points the other way
A debit/credit column was ignored whenever an amount had a minus sign, so a debit-positive export read backwards. Fixed, with three tests.
-
Ten real Excel bank-statement fixtures through ai-bookkeeper: no faults
We ran OCA's 5 .xlsx and 5 .xls bank-statement test files through ai-bookkeeper's Excel readers. All ten read correctly, including text-marker apostrophes.
-
Bank exports that arrive wrapped in Excel: 28 new checks on the ai-bookkeeper reader, no faults
A sep= line, blank rows, a title block, timestamps and long dates: the ai-bookkeeper statement reader gives the same rows for all of them.
-
A one-line footer made our bookkeeper read a bank file as empty
A one-line footer such as a total row made the bookkeeper read header-less bank files as empty; the reader now skips it.
-
ai-bookkeeper: a euro invoice paid in two instalments now closes
A foreign-currency invoice paid in two dollar instalments used to stay open forever. The last payment now closes it and books the exchange difference.
-
Receipt totals survive a garbled tax cell
ai-bookkeeper now recovers a receipt total when the OCR garbles the tax cell on the closing Total row, measured on 626 real receipt scans.
-
Two German bank exports that read with blank descriptions
Two German bank exports read with blank descriptions because ai-bookkeeper did not know their column names; both now read, found with real sample files.
-
ING Germany exports lost the payee name
ai-bookkeeper's reader did not recognise ING Germany's payee column, so categorizer suggestions lost the best signal.