Plumbing rough-in calculator

List each fixture with the pipe runs you measured from your plan. You get drain and vent sticks, PEX coils, traps, stops and fittings, with waste, and a cost if you type prices. The same plumbing engine as the whole-house takeoff. Nothing leaves your browser.


  

Do the whole house: framing, sheathing, plumbing and more in one takeoff

How it is counted

  1. Pipe. Drain plus vent feet, times (1 + waste), divided by the stick length and rounded up.
  2. PEX. Hot and cold feet are ordered separately, each with waste, in whole coils.
  3. Traps and stops. One trap per fixture that drains, one stop per hot or cold run unless you type the count.

Questions

How much drain and vent pipe do I need for a bathroom with a toilet, sink and tub?

With a toilet (6 ft drain, 4 ft vent), a lavatory (5 ft drain, 5 ft vent) and a tub/shower (8 ft drain, 6 ft vent), the drain and vent runs total 34 ft. With 10% waste that is 37.4 ft, which is 4 sticks of 10 ft pipe. The lengths are the ones you type from your own plan; the calculator only adds them.

How many PEX coils for a bathroom's hot and cold water?

Using the same bathroom, hot runs of 10 ft and 14 ft total 24 ft and cold runs of 12, 10 and 14 ft total 36 ft. Each is one 100 ft coil with 10% waste, so the order is 1 hot coil and 1 cold coil, with 3 traps and 5 stops (the toilet gets one cold stop, the lavatory and tub one per hot and cold run as typed or defaulted).