HVAC duct rough-in calculator

List each room with the supply and return runs you took from your own duct layout. You get rigid trunk sticks, flex rolls, boots, registers, return grilles and fittings, with waste, and a cost if you type prices. The same HVAC engine as the whole-house takeoff. It sizes nothing: loads, duct sizes and airflow are not checked. Nothing leaves your browser.


  

Do the whole house: framing, sheathing, plumbing and more in one takeoff

How it is counted

  1. Rigid trunk. Trunk feet times (1 + waste), divided by the stick length and rounded up.
  2. Flex. Supply plus return feet of every room (times its count), with waste, in whole rolls.
  3. Outlets. One register and one boot per supply run, one grille per return run, unless you type the counts. Fittings are the ones you type.

Questions

How much duct do I need for a small house with three bedrooms, a living room and a hall?

With a 30 ft rigid trunk, three bedrooms of 12 ft supply flex each, a living room with 20 ft supply and 10 ft return, and a hall with 8 ft return, the flex runs total 74 ft (56 ft supply and 18 ft return). With 10% waste that is 81.4 ft, which is 4 rolls of 25 ft flex, and the trunk is 33 ft with waste, which is 7 sticks of 5 ft rigid duct. The lengths are the ones you type from your own layout; the calculator only adds them.

How many registers, boots and return grilles does that layout need?

Each supply run gets one register and one boot unless you type the count, so the three bedrooms and the living room's 2 typed registers make 5 registers and 5 boots. The living room's return and the hall's 2 typed grilles make 3 return grilles. The 3 trunk fittings you typed are carried through as 3 fittings.