Keep this bid so it is still here when the customer calls back. Every number on this form is saved together, under a name you choose, along with the figure it gave you, and restoring one puts the whole job back exactly as you priced it. Mark each one won or lost when you hear — the ones you have not heard back on stay listed as waiting, with how long they have been out. Once a few have come back, this panel says how long yours actually take, and how many are still out past that. Once enough of them have been decided, it also says whether the bids you save here have been landing differently lately than they used to.
Kept in this browser only, on this site’s own storage. Nothing is uploaded, and clearing your browser data clears it — download a backup to keep a copy or open your bids on another device. Bids are kept per tool, so these are the ones you saved here.
Wall brace calculator
Diagonal wall braces (let-in 1x4, metal T-brace) stiffen a wall until the sheathing goes on. Type one wall length per line, the wall height and your own rule, and get how many braces each wall takes, how long each brace is and the feet to buy. The rule is the same one the takeoff tool uses: every wall at least as long as your minimum gets one brace per spacing, each as long as the wall height over the sine of the angle. Nothing leaves your browser.
Which walls. Every wall at least your minimum length. Which walls are braced wall lines under your code is the engineer's or building department's call; this counts a rule you type.
How many. The wall length divided by your spacing, rounded up. Shorter walls get none.
How long. Wall height divided by the sine of the brace angle: 135.8 in for an 8 ft wall at 45 degrees. A brace at that angle also needs height divided by the tangent in horizontal run, 96 in here, so the page warns when a wall is too short for the braces you asked for.
Questions
How long is a 45 degree brace in an 8 ft wall?
About 11 ft 4 in measured on the diagonal (96 in over sin 45 degrees = 135.8 in). Buy a 12 ft 1x4 and cut it.
Does this meet code?
It does not check any code. Braced wall length and method come from your code edition and your engineer.
Can I count metal T-braces the same way?
Yes, if they run at your angle; the number and length are the same arithmetic. Follow the manufacturer's installation for the actual product.