Open-source purpose-built robots
How much does tacking cost a wing-sail drone, and does a tack-aware router win it back?
research/marine-sail
In 54 simulated 38 km beats of a 4 m wing-sail drone (parametric wind and tide), a router blind to the tack stall loses a mean 4.5% in steady wind (max 9.8% at a 120 s tack), planning with the cost cuts that to 1.0%, and a greedy layline controller loses up to 17.6% with a 0.5 m/s tide and 3 to 25% when the wind shifts
6 tests
What it found
Milestone 5 of track 23's marine-sail step, filed under the marine-hull programme. A stdlib force-balance polar for a 4 m wing-sail drone (finite-wing lift slope, induced drag, ITTC-1957 friction, an unsourced Froude wave term, keel induced drag; best upwind VMG 2.08 m/s at 35 deg in 8 m/s wind) feeds an isochrone router over 38.6 km upwind in steady, oscillating (+-15 deg) and veering (60 deg) winds, 4, 8 and 12 m/s, with and without a 0.5 m/s tide.
Tack stalls of 30, 60 and 120 s are charged. Planning blind to the stall loses a mean 4.5% (max 9.8%) in steady wind; planning with it loses 1.0% (max 3.4%); a greedy layline controller loses up to 17.6% in a tide and 3 to 25% in shifting wind. Wind and tide are parametric because recorded fields were unreachable; craft and wave-drag coefficients are not sourced; no published polar check; leeway ignored. Preliminary; simulation only.
Research log
Ongoing: each run adds a batch and an entry, newest first. Source: LOG.md.
2026-11-05 · Milestone 5: polar and isochrone routing with a tack penalty (hypotheses written before the sweep)
- H1: planning with the tack cost cuts the cost-blind loss in steady wind by at least half. H2: a greedy layline controller is within 3% of the planner in steady wind. H3: it loses more than 5% in shifting wind.
- Outcome: H1 held (mean 4.5% to 1.0%). H2 held without tide (within quantisation) and failed with tide (up to 17.6%). H3 held (8.4% and 16.6% mean).
- Limits: parametric wind, unsourced craft and wave-drag coefficients, no published polar check.
Paper, code and results
More in Open-source purpose-built robots
- If a late field loses yield instead of failing a hard deadline, does a scout-and-treater fleet still lose to inline weeding robots?Replaces the hard deadline of osrobot-deadline with a 2% yield loss per leaf stage of delay (Knezevic et al. 2003): the best pipeline costs 1.06 to 1.20 times the best inline fleet at 0.72 ha and 1.49 to 1.51 at 0.18 ha, and at 1.62 ha inline is cheaper when the window closes by 8 h and the pipeline from 12 h
- What does a 2-joint feeding arm cost against a 6-joint one once the whole bill of materials is priced?What does a 2-joint feeding arm cost against a 6-joint one once the whole bill of materials is priced? About 1.8 times, not 3: $66 against $122 at the SO-ARM101 table's $13.89 servo, rising to 2.4 times at a $49 retail servo.
- Does treating weeds as you drive still beat scouting first when the robot uses published laser-weeder numbers?Re-running the
osrobot-field weeding model with sourced laser-weeder constants (2 m swath, 0.73 s per weed, 99.2% kill) halves the time but keeps the ranking: inline treatment takes 71.7 min against 79.3 for scout-then-treat at 0.3 weeds/m² and 1 km/h, and scout never wins across densities, speeds and detector hit rates
- Can a stdlib static linter catch the lab-protocol faults the Opentrons simulator accepts?Can a stdlib static linter catch the lab-protocol faults the Opentrons simulator accepts? It flags 362 of the 522 seeded faults to the simulator's 270, adding reused tips, tips left on, sub-minimum volumes and carry-over; stylised, partly circular.
- Does the MuJoCo feeding-arm result change when the lips have the ISO/TS 15066 face stiffness and the safe force comes from the standard?Corrected 2026-11-13: the contact stiffness and damping were entered per kilogram, not per newton, so the face is 3.3× softer than the standard's and the 'every trial under 65 N' result does not hold at high damping…
- How much force can a feeding-arm tip apply to a lip before the tissue bottoms out on bone?With tissue as a 5 to 20 mm layer bonded to bone at 4 to 45 kPa, the force that indents it 30 % is 0.05 to 9 N, 1.3 to 1000 times below the simulated 12.6 to 53 N trial forces, so the arm needs a newton-scale force cap, not 65 N (published bottom-effect corrections, no FE run)
All 50 Open-source purpose-built robots projects →
Other research topics
Proper scoring & elicitation28Effort & peer prediction9Verification games & slashing19Detection & tolerances15Markets as routers13Prediction-market design9Paying contributors8Decentralised training systems23Digital twins & sim-to-real164LLM chip design loops40Robot manufacturing loops53Ambient AI assistant46Self-replicating manufacturing34Simulation-first design64Engineered clothing45Task-specific AI accelerators40Algorithmic chip-design loops42Open-source purpose-built robots50The software-engineering loop43Adversarial human imitation41Open-source residential construction41Autonomous multi-angle capture35Sensing, imaging and 3D33Energy supply and dense energy storage41Robot societies among people32Agentic co-design of low-cost robots28Laundry-hanging robots26Machine learning on qualitative data23Robots on the building site28Civilizations & group psychology3History & human sciences4
Produced with AI assistance (Claude). Results are from the code in this repository and are simulated or stylised unless the abstract says otherwise; nothing here implies affiliation with or endorsement by any lab, researcher or company cited. MIT licensed.