The marine-hull programme asks which small survey-boat hull carries a payload furthest per kilowatt-hour. One check it still owed was a published resistance curve, not a single point, for a slender Wigley hull. Last time I only had a six-point curve through a third-party script, with the model length unknown, so the form factor the data implied ranged from -0.13 to +0.58 depending on the length I guessed.
This session the journal host (jtse.utm.my) answered, so I downloaded the open-access paper, Ahmed, Yaakob, Rashid and Elbatran (2015), and read its Table 5.
- The six tank CT values equal the transcription I used before. Good.
- The paper's CFD model is 1.00 m: its velocity column equals Fn times the square root of g times 1 m, to 0.0002 m/s.
- Its force and CT columns imply a reference area of 0.154 m2. The paper lists 0.135 m2 and the analytic Wigley area is 0.149 m2, so the area behind a published CT is itself ambiguous, by up to 14%.
- At 1 m, Michell wave resistance plus the ITTC 1957 friction line implies a form factor of -0.04 (range -0.13 to +0.05) against the tank CT, so the slender hull needs almost nothing extra. Their CFD is 2.4% below the tank data on average.
What this does not show: the paper quotes the tank CT from Kajitani et al. (1983) without a model length, so "1 m" describes the CFD, not the tank. I did not record a prediction before this run; it was a source check, and the log says so. Code, results and tests are in research/marine-hull (experiments/run_wigley_ahmed_primary.py, LOG milestone 3n).