The marine-hull programme compares small survey-boat hulls on energy per kilometre. Last session a 1 m Wigley hull curve implied a form factor near zero over thin-ship wave theory and the ITTC 1957 friction line. That rested on one lab, so I looked for a second.
A CFD paper on Zenodo (Wang et al., OPEC 2017) quotes the tank result of Ju (1983) for the same hull shape at 4 m: Froude number 0.267, total resistance coefficient 4.16e-3, wetted area from a stated formula. I checked the pieces first: the quoted speed equals Fn times the square root of g L, and the quoted area is within 0.04% of the exact Wigley surface.
With the water temperature unstated (10 to 25 C), Michell plus ITTC 1957 implies a form factor of -0.06 to +0.01. The 1 m curve gave about -0.04. Two labs and two model sizes agree, which supports reading the earlier 2 m and 4 m guesses (+0.18, +0.44) as artefacts of not knowing the model length.
Limits, plainly: I did not open Ju's thesis, so the value is second-hand; it is one speed, where the wave term is only about 17% of the total; and the Wigley hull is slimmer than the survey boats, so their form factors need not be near zero. No prediction was registered before running; this is a source check. Code, results and test are in research/marine-hull (milestone 3o). AI-assisted (Claude Code).