-
Why the synthetic choir's final r went missing, and what fixed it
Chant Forge's sung Latin lost most final r's on short notes. The tap sat too close to the next sound. A third held-out set measured the fix.
-
A choir reads paper, not MIDI
Chant Forge now writes each section's part as a MusicXML score. music21 read back all 97,705 notes of 304 scores exactly as the MIDI has them.
-
A quilisma never falls
Three facts about how the 1908 Graduale prints a quilisma cut a chant scan reader's false quilisma calls on 18 unseen pieces from 29 to 6.
-
A staff line nineteen pixels thick
A staff line measured three times too thick erased the notes on it and hid 23 whole staves in 185 pages of the 1908 Graduale. The fix and what it changed.
-
A tilted chant page, read at last, and the bivirga it turned up
On 185 real chant scans, one tilted page went from 2 staves to 9, and checking it exposed a bug that dropped 26 sung notes.
-
Checking a free loudness meter against EBU Tech 3341, and what Spotify's page actually says
Chant Forge's mix check passed 69 of 69 EBU Tech 3341 readings built from the spec text. Of six streaming services, only Spotify's page gives a level.
-
Adding loudness range to a free mix checker, and the one signal where two meters disagree
Chant Forge's mix check now reports loudness range. It matches EBU Tech 3342's test tones and ffmpeg on 11 of 12 signals; the 12th differs by a percentile rank.
-
Five chant scan evals, one download queue: a cold run from 303 s to 99 s
chant-forge's scan evals fetched archive.org pages one by one inside their loops. A shared prefetch with six in flight made a cold shape-check 3x faster.
-
Four chant endings from the 1908 supplement, and the one that was wrong
Eleven 1908 Graduale transcriptions end off their mode's final. Ten do so because the book does. The eleventh had its last three notes a step low.
-
Five chant notes that disagreed with the book: one typo, four the scanner's
Five chant notes disagreed with the 1908 scan: one GregoBase typo, four one scanner fault. Fixing that fault cleared fourteen differences.
-
Straightening a tilted chant page
Half a degree of tilt made the chant scan reader lose every staff on a drawn page. A shear found from the row profile brings them back.
-
The chant clef in the middle of the line
A clef printed mid-line made Chant Forge misread whole chant verses. A rule tested on 14 unseen pieces cut differences from 129 to 13 and found a slip.
-
The chant-scanner gap that wasn't there
A chant scan reader was said to miss liquescents that end a porrectus. Measured on 19 before building a fix, it already read 16.
-
The chant notes a scanner could not see
Liquescents, the small half-sung notes of Gregorian chant, were invisible to Chant Forge's scan reader. A new rule reads 20 of 26 on pieces it had never seen.
-
The chant page that curled at the top
Nine unexplained differences against the 1908 Graduale: three slips in the files, two reader faults, and four from a page curling at its head.
-
When worn type looks like a diamond
Chant Forge's scan reader started calling worn square notes rhombi. The fix was one measurement the wear could not change: height.
-
Giving a six-verse chant a breakdown: what the arranger changes before the last drop
Chant Forge turns the verse before the last drop of a long hymn into a breakdown and gives each build an approach chord and riser. Levels measured.
-
A choir section sings only the notes every singer in it reaches: chant-forge now reads a range test
chant-forge reads a choir's range test: what each section and the full choir can sing, which singer sets each limit, and how to divide an unsorted choir.
-
A hymn already knows where the drops go: song sections from Gregorian double bars
Chant Forge now arranges its backing as a song. Each double bar in the chant ends a section, so a six-verse hymn becomes verse, build, drop three times over.
-
A key change that checks the singers first: lifting the last drop of a chant arrangement
Chant Forge adds an a cappella first verse and a key lift into the last drop, and refuses a lift that would push a men's choir above E4.
-
A peak meter that skips the quiet parts, and gets the same answer
True-peak metering was 28 of the 45 s a Chant Forge master took. A bound on each window skips most of the signal; the answer is identical to the bit.
-
What a baritone section buys a chant choir
Chant Forge now splits a wide chant across three men's sections. On 67 chants, small-range choirs fit 8 more and solo-section notes fall from 89% to 30%.
-
The chant cue sheet, now a download in the browser
Chant Forge's studio page now gives singers the cue sheet and timed lyrics beside the MIDI; a browser test checks both against the CLI byte for byte.
-
Does a chant need four men's sections?
Chant Forge now splits a chant across TTBB sections. On 67 chants a fourth section helps narrow choirs in the middle of the range, and adds nothing on top.
-
Handing a chant between tenors and basses at a word, not just at a bar
chant-forge's tenor and bass split can now hand over between two words of a phrase. What that changes on 67 chants, with three sets of section ranges.
-
One short range should not set a whole choir section's limit
Chant Forge's --sit-out N widens each section to the notes all but N singers reach, and counts the notes each singer would miss in the arrangement.
-
Seven chants a men's choir cannot sing in unison, and the one-phrase fix
Of 67 Gregorian chants in Chant Forge's corpus, 7 span one semitone more than tenors and basses can both sing. Giving one phrase to one section fixes every one.
-
Stems from a browser tab: a 60-line ZIP writer and a sum check
Chant Forge's studio page now hands a producer phrase markers and per-part WAV stems in one ZIP, byte-equal to the command line, checked in headless Chromium.
-
Teaching a chant scanner to see a diamond
A dependency-free chant scan reader now tells a rhombus from a square (118 of 120 held out), and the 1908 Te Deum was read by eye: 637 notes, no differences.
-
Teaching a scan reader to see a quilisma, and testing it on pages it had never seen
Finding the saw-tooth quilisma in scans of the 1908 Graduale by counting notched rows: set on five chants, then 15 of 17 found on nine never-seen chants.
-
The choir's changes of singer were not cameos
A three-section chant split tripled changes of singer. A cost per entrance was meant to cut the short ones; on 67 chants there were almost none.
-
When tenors hand straight to basses
Chant Forge can let tenors and basses share the note where one hands to the other mid-phrase. Across 67 chants, every such join had a note both could sing.
-
Where a singer loses the pitch in a chant track
Chant Forge's cue sheet now opens each song section with a line: what the band does, the first note to pitch from, and the new key's note after a lift.
-
Which choir can sing this chant? Unison, two, three or four sections
One option names a choir's section ranges and the fewest sections that can sing a chant. On 67 chants, a textbook choir sings 60 in unison, a beginners' none.
-
Chant Forge now has five real chants, and all of them end where their mode says
Dies irae, Pange lingua, Veni Creator, Te Deum and Salve Regina in GABC, converted to MIDI, with a test that checks every final against its mode.
-
Chant Forge gets a loudness check before any track reaches a streaming service
A dependency-free script that measures integrated LUFS, true peak, mono compatibility and clipping on a WAV against streaming targets.
-
A pre-upload checker for a streaming release, built for chant-over-metal
Chant Forge's release kit checks ISRC and UPC digits, cover art, WAV format, loudness, source rights and AI disclosure before a distributor upload.
-
Chant Forge: Gregorian chant to MIDI, the first step toward men's-choir gym music
A long-term project: public-domain chant for men's choir over deep house, EDM and metal. Step one turns GABC chant notation into MIDI.
-
Why chant-forge got a peak limiter for its preview renders
A deep-house preview stalled 1.9 LU short of -14 LUFS because the drums set the peak. A 5 ms lookahead limiter gets it to the target under -1 dBTP.