A flat 8 in spacing was a placeholder. Nailing schedules for subfloor sheets usually name two numbers: a tighter spacing on the supported edges and a wider one in the field.
The wall framing takeoff now takes fastenerEdgeSpacing and fastenerFieldSpacing (defaults 6 and 12 in). It walks each sheet piece in the layout: both ends, which sit on joists, and the front and back rim edges count at the edge spacing, and every joist line strictly inside the piece counts at the field spacing. Long edges between courses run across the joists, so they are left out; those are blocked or tongue-and-groove.
A test builds a 20 x 8 ft floor, counts the ends and the interior joist lines independently, and checks the total, with and without a rim. The spacings are inputs; the engineer's real schedule and the fastener type are not checked, and no real order has been compared.