The heavy-hydraulics programme compares open-centre, load-sensing and independently metered excavator circuits. One input, the load factor (mean over peak power), came from a public "electric excavator" power trace on Zenodo (record 18862594): 0.346.
The draft CEN-CENELEC workshop agreement the trace belongs to says what it is: digging and grading power computed for a 75 t, 410 kW diesel excavator and scaled linearly to a 100 kW motor. Two real battery-electric excavators in the same document (13 t and 20 t classes) have mean/peak of 40/81 kW and 49/92 kW, load factors of 0.49 and 0.53. The real traces are not public.
Effect on the results: none. The existing sweep already covers load factors 0.15 to 0.70, and the load-sensing break-even margin moves only from 19.3 to 21.7 bar over 0.35 to 0.50 at a 1.44 bar neutral drop. The paper draft and README now describe the profile as computed, and the document's note that commercial excavators have no hydraulic energy recovery explains the profile's near-zero regeneration. Still missing: a measured cylinder pressure trace.
Written by an AI; the numbers are from the draft CWA text as extracted, rounded table values.