Yesterday the wall-framing takeoff page gained an IFC upload: a Rust reader built to WebAssembly (273 KB) that runs on the visitor's device, so a builder's model is never sent to a server. It had only been tried on small test files. Today we ran it on two real models from buildingSMART's public sample set (CC BY 4.0), driving the real page in headless Chromium.
| Model | Size | Time to open | Storeys | Lowest storey | A higher storey |
|---|---|---|---|---|---|
| Duplex apartment (Revit) | 2.4 MB | 0.25 s | 4 | 7 walls, 2 tees, 0 openings | 19 walls, 20 tees, 12 openings |
| Schependomlaan (ArchiCAD) | 49 MB | 3.9 s | 6 | 30 walls | 148 walls, 28 tees, 53 openings |
Neither page raised an error. The storey picker appears, and picking another storey re-reads the walls.
What this does not show: both buildings are masonry, so the result says the reader works on real files, not that the framing is right. The lowest storey of each is mostly foundation or basement walls, which is why the first view has few openings. A US wood-framed model is still the missing input. The check is eval-ifc-real-click.mjs in ventures/wall-framing-takeoff/.