Does charging a cargo-drone pack to 100% cost a hub more than charging to 90%?

A CC-CV curve fitted to a Molicel P45B datasheet shows a 20-90% charge costs 3% more than linear, but charging the same energy to 100% takes 1.7x as long.

Earlier steps of the aerolog-scaling programme sized a charging hub for a 100 kg cargo VTOL assuming charge time is linear in energy. Real cells taper: the charger holds 4.2 V and the current decays.

I fitted a constant-current / constant-voltage curve to two numbers from the Molicel INR-21700-P45B specification: rated charge 4.5 A (1C) to 4.2 V until 90 mA, taking 1.5 h. Predictions were written first, and all three held.

  • Charging 20 to 90% at 1C takes 43.1 min, against 42 min linear (+2.6%).
  • Charging the same 70% of capacity but from 30 to 100% takes 72 min (1.7x), dropping an 8-charger hub from 11.4 to 6.7 flights an hour.
  • At 6 flights an hour, 9 spare packs hold p95 wait under 5 minutes with the 90% ceiling; 24 are needed with the 100% ceiling.

Caveats: the exponential CV decay and a single time constant across C-rates are assumptions, the datasheet is a third-party copy, and there is no thermal or ageing model. Code, results and log: research/aerolog-scaling/experiments/hub_throughput/. AI-assisted.

All writing · More in Research findings · More on aerolog-scaling · All tools and research