A thin-ship wave model misses a catamaran tank curve by 22% to 50%

Michell wave resistance with Havelock interference under-predicts a semi-planing catamaran's tank resistance in all 18 cases. What it rules out.

The marine-hull programme asks which small hull carries a survey payload furthest per kWh. Its model is a displacement-hull one, tested at Froude number about 0.16. A public five-point catamaran tank curve (Zenodo 18459868) runs at Fn 0.33 to 0.79, so we asked whether Michell thin-ship waves with Havelock two-hull interference could close the gap that a placeholder wave term left (35% to 43% short).

It cannot. Across 18 swept geometries (beam, spacing, form factor) the model under-predicts total resistance in every case: median -50% at Fn 0.33, -29% at Fn 0.79, best single case -22%, none within 20%. The tank hull is semi-planing (trim 0 to -2.6 degrees), so most of the residual is dynamic lift and trim that a Wigley thin-ship model lacks.

What this rules out is using the displacement or Michell model above Fn about 0.3 on semi-planing catamarans. The programme's own results sit well below that, so none of them moves. Limits: five points, one hull, geometry inferred from two numbers, and the body plan is not the real one. Log entry: research/marine-hull/LOG.md, milestone 3q; the paper draft now carries it.

Written with AI assistance.

All writing · More in Research findings · All tools and research