DXF NESTING · LASER, PLASMA, WATERJET, CNC ROUTER · RUNS IN YOUR BROWSER · NOTHING IS UPLOADED

Nest your DXF parts on a sheet, free

Drop in the DXF files for a job, set how many of each, the sheet size, the gap between parts and the edge margin. You get nested sheets as DXF for your CAM, how much of each sheet is used, the cut length and the pierce count, with every gap checked. Small parts go inside the holes of big ones.

For shops quoting or cutting small batches that do not have a nesting module, and for anyone checking how many sheets a job needs before buying them. A greedy nester, not an optimiser: see what it does not do.

1. Parts

2. Sheet and spacing

Use the drawing's units.

Worked example

The example job is 72 mild steel parts in millimetres: 12 square flanges (200 mm, 110 mm bore, four bolt holes), 16 gussets, 10 L brackets, 30 washers (80 mm) and 4 base plates (600 × 140), on a 2500 × 1250 sheet with a 5 mm gap and a 10 mm margin. It nests on one sheet using about 1,912 mm of its length (about 80% of that length is parts), with washers placed inside the flange bores and gussets turned to pair up. Cut length is about 59.5 m and there are 206 pierces, which is what a laser or plasma quote is priced on.

What it does and does not do

Does: true-shape nesting of closed outlines with their holes on rectangular sheets, parts inside holes, rotation in steps you choose, a minimum gap and edge margin, several sheets, the remnant left at the far end, an independent gap check, DXF out on separate cut and mark layers, utilisation, cut length and pierce counts, and the area bound (no nester can use fewer sheets than the parts' area divided by a sheet's usable area).

Not modelled: common-line cutting, lead-ins and lead-outs, kerf compensation (your CAM does that; set the gap at least to the kerf plus what your material needs), cut order and heat, micro-joints and tabs, grain beyond 0/180° turns, remnant and non-rectangular sheets, mirroring parts, nesting the same job across different sheet sizes. Placement is greedy on a grid, so commercial nesters with search usually fit a few percent more; treat the sheet count as a cautious estimate.

When to use something else: production runs where a few percent of material is worth a licence (SigmaNEST, ProNest, Lantek, your machine's own software), or when you need lead-ins and cut order in the same step.

Questions

How do I nest DXF parts for free?

Open this page, drop in one or more ASCII DXF files, give each part a quantity, enter the sheet size, the gap between parts and the edge margin, and press Nest. You get each sheet as a picture and as a DXF file for your CAM, with utilisation, cut length and pierces per sheet. Nothing is uploaded.

Will it put small parts inside the holes of big ones?

Yes. Holes in a part stay free, so washers, slugs and small brackets are placed inside large cut-outs when they fit with the gap you set.

How is the gap between parts guaranteed?

Parts are placed on a fine grid that always covers the whole shape, and each placed part reserves extra cells for the gap plus the arc flattening error. After nesting, a separate check measures the distance between every pair of placed outlines from their edges and reports any pair closer than the gap.

Is it as good as SigmaNEST, ProNest or Deepnest?

Usually not quite. It is a greedy placement on a grid, so a commercial true-shape nester with search will often fit a few percent more parts per sheet. It is free, instant, private and its sheets come out as plain DXF; the page also shows the area bound, the fewest sheets any nester could use.

Which DXF entities are read?

LINE, ARC, CIRCLE, LWPOLYLINE and POLYLINE with bulges, ELLIPSE, SPLINE and INSERT of blocks (with scale, rotation, mirroring and arrays). Text, dimensions and hatches are skipped and counted. Binary DXF is not read; save as ASCII DXF.

Are my drawings uploaded?

No. The files are read and nested in your browser tab and never leave your computer.

Command line: node cli.mjs part.dxf:20 --sheet 2500x1250 --gap 5 --margin 10 --out nest.dxf (in the source).